Relay, Power Control: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Using two nuts, install the Power Control Relay (2) to the PCR bracket (1).

   Courtesy of CHRYSLER GROUP, LLC

2. Connect and secure the eyelet terminals (1) to the PCR using two nuts (3).
3. Connect the wire harness connector (2) to the PCR.

   Courtesy of CHRYSLER GROUP, LLC

4. Inster the PCR cover (1) to the PCR.
5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.