Sending Unit And Sensor, Fuel Level: Installation
WARNING: This page is about a different car, the 2017 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the fuel level sending unit to the fuel pump module, slide unit on mounting track until the plastic locking tab (3) snaps into position.
- Route the fuel level sending unit wires into the retaining tabs (1, 2) on the fuel pump module.
- Connect the fuel level sending unit wire harness connectors (1, 2) to the fuel pump module.
- Install the main fuel pump module. Refer to MODULE, FUEL PUMP, INSTALLATION .