FixVault
Home › Jeep › 2018 › Wrangler JK Rubicon, Automatic Trans › Repair and Diagnosis › Accessories & Equipment › Drivers Assistance Systems - ADAS › Electronic Control Modules (Service Information) › Module, Transmission Control (TCM) › Removal

Module, Transmission Control (TCM): Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the knee bolster/steering column lower panel. Refer to COVER, STEERING COLUMN OPENING, REMOVAL .
    GC0173825Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wiring harness connectors (2) from the Transmission Control Module (TCM) (1).
    GC0173824Courtesy of CHRYSLER GROUP, LLC
  4. Remove the fasteners (1) securing the TCM to the vehicle.
  5. Remove the TCM from the vehicle.
About FixVault