FixVault
Home › Jeep › 2019 › Compass Trailhawk › Repair and Diagnosis › Engine Mechanical › Exhaust System › Sensor, Differential Pressure › Removal And Installation › 1.6L And 2.0L Diesel › Installation

1.6L And 2.0L Diesel: Installation

  1. Connect the hoses to the differential pressure sensor and tighten the clamps.
  2. Install the differential pressure sensor and securely tighten the nut.
  3. Connect the differential pressure sensor wire harness connector.
  4. Install the engine cover. Refer to the appropriate Service Information .
  5. Connect the negative battery cable.
About FixVault