FixVault
Home › Jeep › 2019 › Compass Trailhawk › Repair and Diagnosis › Engine Mechanical › Fuel System › Fuel Injection, Diesel › Sensor, Crankshaft Position › Removal And Installation › 2.0L Diesel › Installation

2.0L Diesel: Installation

GC0165490Courtesy of CHRYSLER GROUP, LLC
  1. Install the Crankshaft Position (CKP) sensor and tighten the screw (1) to the proper specification. Refer to TORQUE SPECIFICATIONS DIESEL  .
  2. Connect the CKP sensor wire harness connector (2).
  3. Install the engine cover. Refer to the appropriate Service Information .
  4. Connect the negative battery cable.
About FixVault