FixVault
Home › Jeep › 2019 › Compass Trailhawk › Repair and Diagnosis › Engine Performance › Ignition System (Service Information) › Plug, Glow › Removal And Installation › Installation

Removal And Installation: Installation

  1. Using the tool, install the glow plug and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  2. Connect the glow plug wire harness connectors
  3. Install the engine cover. Refer to the appropriate Service Information .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
About FixVault