FixVault
Home › Jeep › 2019 › Renegade Trailhawk › Repair and Diagnosis › External Pages › Different car › Section 1284 (1.3L Fuel System) › Fuel Injection › Sensor, TMAP-Intake Manifold › Removal And Installation › Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the intake manifold pressure and temperature sensor and securely tighten the retaining screw.
  2. Connect and lock the wire harness connector to the intake manifold pressure and temperature sensor.
  3. Install the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
  4. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
About FixVault