Removal And Installation: Installation
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
- If removed, connect the wire harness connector for the speed control switch.
- Position the wire harness in the steering wheel following the correct routing and secure the wire harness in the retainers.
- Position the speed control switch to the steering wheel, then install and securely tighten the fastener.
- Repeat Steps 1 through 3 for the switches mounted on the left side of the steering wheel.
- Install the remote radio switch. Refer to SWITCH, REMOTE RADIO, INSTALLATION .
- Install the DAB. Refer to AIR BAG, DRIVER, INSTALLATION .