Clutch Specifications
The B, C, D and E clutch clearance must be measured and properly set during the assembly process of the transmission. The recommended measurement procedures can be found in the Standard Procedures of this service information.
CLUTCH COMPOSITION
| A - Clutch | Dog Clutch |
| B - Clutch - Diesel and V6 Gas Engines | 8 Active Surfaces |
| B - Clutch - 4 Cylinder Gas Engines | 6 Active Surfaces |
| C - Clutch - Diesel and V6 Gas Engines | 3 Discs |
| C - Clutch - 4 Cylinder Gas Engines | 2 Discs |
| D - Clutch | 4 Discs |
| E - Clutch | 5 Discs |
| F - Clutch | Dog Clutch |
CLUTCH CLEARANCE
| All clearance measurements with 3.2 kg/cm2 (46 psi) of force applied to clutches. | |
| B - Clutch - Diesel and V6 Gas Engines | 1.28 - 1.77 mm (0.050 - 0.070 in) |
| B - Clutch - 4 Cylinder Gas Engines | 1.03 - 1.52 mm (0.040 - 0.060 in) |
| C - Clutch - Diesel and V6 Gas Engines | 0.76 - 1.15 mm (0.030 - 0.045 in) |
| C - Clutch - 4 Cylinder Gas Engines | 0.51 - 0.90 mm (0.020 - 0.035 in) |
| D - Clutch | 1.1.01 - 1.50 mm (0.040 - 0.059 in) |
| E - Clutch | 1.28 - 1.77 mm (0.050 - 0.070 in) |