FixVault

Valve, Short Runner: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the intake manifold. Refer to MANIFOLD, INTAKE, REMOVAL, 3.6L , MANIFOLD, INTAKE, REMOVAL, 5.7L , or MANIFOLD, INTAKE, REMOVAL, 6.4L .
    GC0148451Courtesy of CHRYSLER GROUP, LLC
  3. Remove bolts (1) and the Short Runner Valve (SRV) actuator (2).
    GC0148453Courtesy of CHRYSLER GROUP, LLC
  4. Remove and discard the SRV actuator rubber O-ring seal (1).