FixVault
Home › Jeep › 2020 › Grand Cherokee Trackhawk › Repair and Diagnosis › Engine Performance › Ignition System (Service Information) › Capacitor, Ignition › Installation › 5.7L / 6.4L

5.7L / 6.4L

GC0080072Courtesy of CHRYSLER GROUP, LLC
  1. Install the ignition capacitor (2). Tighten bolt to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Install the ignition capacitor wire harness connector (1).
  3. Install the engine cover.
  4. Connect the negative battery cable.
About FixVault