Keyless Go System

WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

The Keyless Go (KG) system changes the state of the vehicle's ignition between the OFF, ACCESSORY, RUN, and START states using a momentary button rather than a conventional key.

The KG system includes the following major components, which are described in further detail elsewhere in this service information:

FOB with Integrated Key (FOBIK) -. Refer to KEY, TRANSPONDER, DESCRIPTION .
Passive Entry Antenna - Multiple Low Frequency (LF) antennas are located throughout the passenger compartment. Refer to ANTENNA, PASSIVE ENTRY, DESCRIPTION .
Remote Frequency Hub (RFH) - The module is located in the drivers rear quarter trim panel. Refer to MODULE, RADIO FREQUENCY (RF HUB), DESCRIPTION .
Keyless Ignition Node (KIN) - Located to the right of the steering column and is concealed beneath the instrument panel Refer to MODULE, KEYLESS IGNITION NODE (KIN), DESCRIPTION .
.