FixVault
Home › Jeep › 2020 › Grand Cherokee Trackhawk › Repair and Diagnosis › External Pages › Different car › Section 324 (Electronic Control Modules (Service Information)) › Module, Display Screen (DSM) › Removal

Module, Display Screen (DSM): Removal

WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL .
    GC0184443Courtesy of CHRYSLER GROUP, LLC
  3. Remove the six screws (1) for the Display Screen Module (DSM) bracket.
    GC0184539Courtesy of CHRYSLER GROUP, LLC
  4. Remove the six screws (1) and remove the DSM (2) from the center bezel.
About FixVault