Module, Radio Frequency (RF Hub): Removal
WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the left rear cargo quarter trim panel and position aside to access the RF hub. Refer to PANEL, QUARTER TRIM, REMOVAL
.
- Disconnect the electrical connectors (1).
- If equipped, disconnect the remote start antenna connector
- Remove the fasteners (2) and remove the RF Hub from the vehicle.