5.7L / 6.4L

Courtesy of CHRYSLER GROUP, LLC

Apply MOPAR® thread sealant with PFTE to the sensor threads.
Install the coolant temperature sensor (2) into the water pump housing.
Tighten the coolant temperature sensor to 11 N.m (8 ft. lbs.).
Connect the coolant temperature sensor wire harness connector (3).
Install the air intake system. Refer to BODY, AIR CLEANER, INSTALLATION, 5.7L or BODY, AIR CLEANER, INSTALLATION, 6.4L .
Fill the cooling system. Refer to STANDARD PROCEDURE .