FixVault
Home › Jeep › 2020 › Renegade Upland › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (1.3L Fuel System) › Fuel Delivery › Sending Unit And Sensor, Fuel Level › Removal And Installation › Installation

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the fuel level sensor, complete with float, engage the clips of the submerged fuel pump drum.
  2. Connect the wire harness connector to the fuel level sending unit.
  3. Install the fuel pump module. Refer to MODULE, FUEL PUMP, INSTALLATION  .
About FixVault