Removal And Installation: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Install a NEW  gasket (1) onto the water pump.

   Courtesy of CHRYSLER GROUP, LLC

2. Install the water pump (1a). Tighten the bolts (1b) in a crisscross pattern to the proper specification. Refer to TORQUE SPECIFICATIONS  .

   Courtesy of CHRYSLER GROUP, LLC

3. Install the water pump pulley (1a). Tighten the bolts (1b) to the proper specification. Refer to TORQUE SPECIFICATIONS  .
4. Install the serpentine belt. Refer to BELT, SERPENTINE, INSTALLATION  .
5. Install the right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, INSTALLATION .
6. Install the belly pan. Refer to BELLY PAN, INSTALLATION .
7. Install the right front tire and wheel assembly. Refer to INSTALLATION .
8. Fill the cooling system. Refer to DRAINING AND FILLING THE COOLING SYSTEM - 2.4L  .
9. Run the engine until it reaches normal operating temperature. Check the cooling system for correct fluid level or leaks. Refer to ADDING ADDITIONAL COOLANT  .
10. Remove the support and lower the vehicle.