Bottle, Pressurized Coolant: Removal

WARNING:

Do not remove cylinder block drain plugs, pressure caps, or loosen radiator draincock with system hot and under pressure. Serious burns from coolant can occur.

Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
Drain the cooling system. Refer to DRAINING .

Courtesy of CHRYSLER GROUP, LLC
Remove the push pins (1) and the radiator closeout panel (2).

Courtesy of CHRYSLER GROUP, LLC
Remove the coolant manifold hose (1).
Remove the turbocharger coolant hose (3).

Courtesy of CHRYSLER GROUP, LLC
Release the retainer and remove the lower coolant hose (2).

Courtesy of CHRYSLER GROUP, LLC
Remove the bolts (2) and the pressurized coolant bottle (1).