FixVault
Home › Jeep › 2021 › Cherokee Trailhawk › Repair and Diagnosis › Engine Performance › 2.4L & 3.2L Ignition System (Service Information) › Solenoid, Variable Valve Timing › Installation › Right

Solenoid, Variable Valve Timing: Installation: Right

GC0144209Courtesy of CHRYSLER GROUP, LLC
  1. Install the Variable Valve Timing (VVT) solenoid seals (1). The seals can be reused if not damaged.
    GC0144211Courtesy of CHRYSLER GROUP, LLC
  2. Refer to the markings made at disassembly and install the intake VVT solenoid (2) and the exhaust VVT solenoid (4) in their original locations.
  3. Install the VVT solenoid mounting bolts (3) and securely tighten.
  4. Connect the wiring harness connector (1) to the VVT solenoid.
  5. Install the resonator. For 2.4L Refer to INSTALLATION , or for 3.2L Refer to RESONATOR, AIR CLEANER, INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
NOTE:

The Cam/Crank Variation Relearn procedure must be performed using the scan tool anytime there has been a repair/replacement made to a powertrain system, for example: flywheel, valvetrain, camshaft and/or crankshaft sensors or components.

About FixVault