FixVault
Home › Jeep › 2021 › Compass Altitude, FWD › Repair and Diagnosis › Body & Frame › Door Locks › Power Liftgate (Service Information) › Switch, Overhead Console › Removal And Installation › Removal

Removal And Installation: Removal

  1. Disconnect and isolate the battery negative cable.
    GC0179287Courtesy of CHRYSLER GROUP, LLC
  2. Using a suitable tool carefully disengage the retaining clips (3) on the side of the power lift gate switch (2).
  3. Disconnect the power liftgate switch wiring harness connector (1) and remove the switch (2).
About FixVault