FixVault
Home › Jeep › 2021 › Compass Altitude, FWD › Repair and Diagnosis › Engine Mechanical › Mechanical › 2.4L Engine (Service Information) › Engine Block › Damper, Vibration › Removal And Installation › Removal

Removal And Installation: Removal

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the right front tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  3. Remove the right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL AND INSTALLATION .
  4. Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL AND INSTALLATION .
    GC0163574Courtesy of CHRYSLER GROUP, LLC
  5. Turn the vibration damper to align the timing marks (1).
    GC0164247Courtesy of CHRYSLER GROUP, LLC
  6. Using the (special tool #9707, Holder, Vibration Damper) (1a), remove the bolt (1b) and the vibration damper (1c).
About FixVault