2.4L - DTCS P1048 To P1D68

• DTC Troubleshooting
  • P1048-Cylinder 2 Oil Supply Solenoid Valve OVERCURRENT
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1049-Cylinder 3 Oil Supply Solenoid Valve Voltage Out Of Range
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P104A-Cylinder 3 Oil Supply Solenoid Valve OVERCURRENT
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P104B-Cylinder 4 Oil Supply Solenoid Valve Voltage Out Of Range
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P104C-Cylinder 4 Oil Supply Solenoid Valve OVERCURRENT
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1061-Cylinder 1 Oil Supply Solenoid Valve Stuck
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1062-Cylinder 2 Oil Supply Solenoid Valve Stuck
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1063-Cylinder 3 Oil Supply Solenoid Valve Stuck
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1064-Cylinder 4 Oil Supply Solenoid Valve Stuck
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1065-Cylinder 1 Solenoid Valve Switch On Time Out Of Range
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1066-Cylinder 1 Oil Supply Solenoid Valve Switch Off Time Out Of Range
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1067-Cylinder 2 Oil Supply Solenoid Valve Switch On Time Out Of Range
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1068-Cylinder 2 Oil Supply Solenoid Valve Switch Off Time Out Of Range
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1069-Cylinder 3 Oil Supply Solenoid Valve Switch On Time Out Of Range
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P106A-Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P106B-Cylinder 4 Oil Supply Solenoid Valve Switch On Time Out Of Range
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P106C-Cylinder 4 Oil Supply Solenoid Valve Switch Off Time Out Of Range
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1115-General Temperature Rationality
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test.
  • P1128-Closed Loop Fueling Not Achieved - Bank 1 Upstream
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P112A-O2 Sensor 1/1 Pumping Undercurrent
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P112B-O2 Sensor 1/1 Pumping OVERCURRENT
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P112E-O2 Sensor 1/1 Performance
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1185-General Pressure Sensor Correlation
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1212-Engine Oil Temperature High - Rpm Limited
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1239-Engine Oil Temperature Too Low
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1300-Crankshaft Position Learn Out Of Range
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P141B-Starter Control 1 Circuit Performance
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P141C-Starter Control 2 Circuit Performance
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P141D-Starter Relay Feedback Open Circuit Performance
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1456-Fuel Tank Pressure Sensor Circuit Low
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1457-Fuel Tank Pressure Sensor Circuit High
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1495-Left Front SEATBELT Switch Circuit High
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1496-Left Front SEATBELT Switch Circuit Low
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1500-Ecu Configuration Mismatch
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1523-VVA Low Oil Pressure
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P152C-Engine Hood Switch 2 Circuit Range/Performance
    • Notes
    • Theory Of Operation
    • Component Functional Description - Hood Latch/Ajar Switch 1
    • Component Functional Description - Hood Latch/Ajar Switch 2
    • Diagnostic Overview - Hood Ajar Switches
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P152E-Engine Hood Switch 2 Circuit High
    • Notes
    • Theory Of Operation
    • Component Functional Description - Hood Latch/Ajar Switch 1
    • Component Functional Description - Hood Latch/Ajar Switch 2
    • Diagnostic Overview - Hood Ajar Switches
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P152F-Engine Hood Switch 2 / Engine Hood Switch 1 Correlation
    • Notes
    • Theory Of Operation
    • Component Functional Description - Hood Latch/Ajar Switch 1
    • Component Functional Description - Hood Latch/Ajar Switch 2
      • Notes
      • Diagnostic Overview - Hood Ajar Switches
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1572-Brake Pedal Stuck On
    • Component Functional Description - Brake Switch
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1573-Brake Pedal Stuck Off
    • Component Functional Description - Brake Switch
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1593-Speed Control Switch 1/2 Stuck
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1609-Internal Control Module Engine Oil Temperature Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1618-Sensor Reference Voltage 1 Erratic
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1621-O2 Sensor Reference Voltage Circuit Low
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1622-O2 Sensor Reference Voltage Circuit High
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1628-Sensor Reference Voltage 2 Erratic
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1696-EEPROM Memory Write Denied Invalid
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1697-EMR (Sri) Mileage Not Stored
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1718-EEPROM Integrity Failure
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1946-00-Fire Prevention System: Crash Event Detected
    • When Monitored
    • Set Condition
    • Diagnostic Test
  • P1CEC-Variable Valve Solenoid Valve Cold Start Closing Position 1 Timing Over-Retard
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1CED-Variable Valve Timing Solenoid Valve Cold Start Closing Position Timing Over-Advance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1CEE-Variable Valve Solenoid Valve Cold Start Closing Position Timing Over-Retard
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1D65-Cylinder 1 Oil Supply Solenoid Valve Performance
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1D66-Cylinder 2 Oil Supply Solenoid Valve Performance
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1D67-Cylinder 3 Oil Supply Solenoid Valve Performance
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1D68-Cylinder 4 Oil Supply Solenoid Valve Performance
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test