Removal And Installation Fore: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Position the fore lower control arm (3) into the vehicle.
2. Install the fore lower control arm inner bolt (2) and fore lower control arm outer bolt (1).
3. With a suitable jack raise the rear suspension to the proper torque specification. Refer to WHEEL ALIGNMENT, TECHNICAL SPECIFICATIONS .
4. Tighten the fore lower control arm inner bolt (2) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
5. Tighten the fore lower control arm outer bolt (1) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
6. Install the tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
7. Remove the support and lower the vehicle.
8. Perform a wheel alignment. Refer to WHEEL ALIGNMENT, STANDARD PROCEDURE .