Removal And Installation: Removal
NOTE:
Before proceeding. Refer to WARNING .
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the rear strut. Refer to STRUT, REAR, REMOVAL AND INSTALLATION .
- Using a Brannick 7600 spring compressor or equivalent compress the spring (5).
- Using (special tool #2027800020, Kit, Remover - Installer Shock / Strut), remove the strut rod nut (1).
- Remove the strut upper mount (2).
- Remove the jounce bumper (3).
- Remove the boot (4).
- Remove the spring (5).