Body Control Module (BCM)
BODY CONTROL MODULE (BCM)
| Refer to COMPONENT INDEX . |
The BCM is used in the power mirror system for enabling the EC mirror auto dim feature. The BCM sets the proper signals over the LIN bus to the CRVMM to enable this feature.
Inputs
- Command Ignition State
- Vehicle configuration data
- Feature request configuration from the Radio
- Configuration status (ON/OFF) requests from the Radio
- Transmission PRNDL and reverse gear status position from the Transmission Control Module (TCM)
- CRVMM EC mirror Status
- Operational status and reflectance value of the EC sensors from the CRVMM
- CRVMM error report signal
Outputs
- Vehicle configuration information
- EC mirror Auto Dim enable/disable to the CRVMM
- EC mirror status
- Commanded ignition status
- PRNDL status to the CRVMM
- Mirror enable request to the CRVMM