Removal And Installation: Installation
WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Position the ACC module with bracket to the grille and line up properly for installing the fasteners.
- Install and tighten the fasteners to secure the bracket with module to the grille.
- Install the AGS. Refer to GRILLE, ACTIVE SHUTTER, REMOVAL AND INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
- Using the scan tool, perform the ACC alignment procedure.