FixVault
Home › Jeep › 2021 › Grand Cherokee Trackhawk › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Electronic Control Modules (Service Information) › Module, Adaptive Cruise Control (Acc) › Removal

Module, Adaptive Cruise Control (Acc): Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the front fascia (Refer to REMOVAL ).
    GC0199686Courtesy of CHRYSLER GROUP, LLC
  3. Remove the fasteners (1) mounting the radar bracket to the front fascia.
    GC0199687Courtesy of CHRYSLER GROUP, LLC
  4. Remove the fasteners (1) mounting the ACC module to the ACC bezel.
About FixVault