FixVault

Gas Or Water Contamination Present

  1. Remove all fuel from the fuel tank Use an appropriate fuel container. Refer to DRAINING FUEL TANK - DIESEL  . Dispose of the contaminated fuel using the proper procedures.
    CAUTION:

    Dispose of petroleum based products in a manner consistent with all applicable Local, State, Federal, and Provincial regulations.

  2. If the engine was turned-on, or the engine was started, drain the high pressure fuel pump, so that no incorrect/contaminated fuel is present inside the high pressure pump and flush with clean diesel fuel.
  3. Remove the fuel tank. Refer to TANK, FUEL, REMOVAL .
  4. Ensure the swirl pot indentation below the in-tank electric fuel pump inlet is completely drained and thoroughly clean the fuel tank of any contaminated fuel.
  5. Completely drain the low pressure fuel lines and flush with clean diesel fuel, then install a NEW  fuel filter.
  6. Install the fuel tank, and fill with clean diesel fuel.
  7. Road test the vehicle to verify normal operation.