FixVault
Home › Jeep › 2021 › Grand Cherokee Trackhawk › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel System › Fuel Injection, Diesel › Sensor, Camshaft Position › Installation

Sensor, Camshaft Position: Installation

GC0146584Courtesy of CHRYSLER GROUP, LLC
  1. Install the Camshaft Position (CMP) sensor (2). Tighten the bolt (1) to 8 N.m (71 in. lbs.).
  2. Connect the CMP wire harness connector (3).
    GC0146436Courtesy of CHRYSLER GROUP, LLC
  3. Install the engine cover (1).
  4. Connect the negative battery cable.
About FixVault