FixVault
Home › Jeep › 2021 › Grand Cherokee Trackhawk › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel System › Fuel Injection, Gas › Throttle Body › Removal › 5.7L

Throttle Body: Removal: 5.7L

GC0145484Courtesy of CHRYSLER GROUP, LLC
  1. Perform the fuel pressure release procedure. Refer to FUEL SYSTEM PRESSURE RELEASE  .
  2. Disconnect the negative battery cable (2).
    GC0143807Courtesy of CHRYSLER GROUP, LLC
  3. Remove the oil fill cap (1).
  4. Remove the engine cover (2).
    GC0144403Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the electrical connector at the Intake Air Temperature (IAT) sensor (1).
  6. Loosen the hose clamp at the air cleaner housing (2).
  7. Remove the resonator retaining bolt (3).
  8. Loosen the hose clamp at the throttle body (4) and remove the resonator.
    GC0080446Courtesy of CHRYSLER GROUP, LLC
  9. Disconnect the electrical connector at the throttle body (3).
  10. Remove the four throttle body retaining bolts (2).
  11. Remove the throttle body (1) from the intake manifold.
    GC0080447Courtesy of CHRYSLER GROUP, LLC
  12. Check the throttle body O-ring (2), replace if necessary.
About FixVault