FixVault
Home › Jeep › 2021 › Renegade Limited › Repair and Diagnosis › Electrical › Body Electrical › Power Distribution › Module, Power Inverter › Removal And Installation › Installation

Removal And Installation: Installation

  1. Connect the power inverter module wire harness connector.
  2. Position the power inverter module on the bracket, then install and securely tighten the fasteners.
  3. Install the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
About FixVault