FixVault
Home › Jeep › 2022 › Compass Red › Repair and Diagnosis › Engine Mechanical › Fuel System › Fuel Injection, Gas › Sensor, Manifold Absolute Pressure (Map) › Removal And Installation › Installation

Removal And Installation: Installation

  1. Install the manifold air pressure sensor and turn it 90 degrees clockwise.
  2. Connect the wire harness connector to the manifold air pressure sensor.
  3. Install the front splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL AND INSTALLATION .
  4. Install tire and wheel. Refer to REMOVAL AND INSTALLATION .
About FixVault