Section 78 (Drivetrain Control Module (DTCM) - DTCS C2203-24 To C2507-64)
WARNING: This page is about a different car, the 2021 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- DTC Troubleshooting
- C2203-24-Switch 1 Request Signal - Signal Stuck High
- C2204-24-Switch 2 Request Signal - Signal Stuck High
- C2205-24-External Temperature - Signal Plausibility Failure
- C2206-64-Steering Wheel Angle - Signal Plausibility Failure
- C2208-64-Over Steering Signal Not Available
- C2209-64-Under Steering Signal Not Available
- C2210-92-Rear Drive Module Electronic Torque Manager Actuator Sensor - Performance Or Incorrect Operation
- Notes
- Description And Operation - All Wheel Drive (AWD) System
- General System Architecture
- Component Functional Description-Power Transfer Unit (PTU)
- Component Functional Description-Rear Drive Module (RDM)
- Technical Data-PTU And RDM
- When Monitored
- Default Action
- Diagnostic Overview - AWD System
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Rear Drive Module (RDM) - Actuator Motor Diagnostics
- DTCM Verification Test
- C221B-64-Implausible Eld Fail Status Signal
- C221D-98-Rear Drive Module Ecu Driver Output Temperature High - Component Or System Temperature
- Notes
- Description And Operation - All Wheel Drive (AWD) System
- General System Architecture
- Component Functional Description-Power Transfer Unit (PTU)
- Component Functional Description-Rear Drive Module (RDM)
- Technical Data-PTU And RDM
- When Monitored
- Default Action
- Diagnostic Overview - AWD System
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Rear Drive Module (RDM) - Actuator Motor Diagnostics
- Drivetrain Control Module (DTCM) - Voltage Supply And Internal DTCM Fault Diagnostics
- C221E-64-Brake Pedal Switch Fail Status - Signal Plausibility Failure
- C221F-64-Drive Style Status Signal - Signal Plausibility Failure
- C2220-54-Ecu Internal Performance - Missing Calibration
- C2224-64-Engine Speed Signal Not Available
- C2225-64-Engine Status Signal Not Available
- C2226-64-Reverse Gear Status - Signal Plausibility Failure
- C2227-64-Engine Torque - Signal Plausibility Failure
- C2228-64-Implausible Data Received From Pcm
- C2229-64-Gear Not Engaged Signal - Signal Not Available
- C2230-98-Transfer Case Motor - Component Or System Over Temperature
- Notes
- Description And Operation - All Wheel Drive (AWD) System
- General System Architecture
- Component Functional Description-Power Transfer Unit (PTU)
- Component Functional Description-Rear Drive Module (RDM)
- Technical Data-PTU And RDM
- When Monitored
- Default Action
- Diagnostic Overview - AWD System
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Rear Drive Module (RDM) - Actuator Motor Diagnostics
- Drivetrain Control Module (DTCM) - Voltage Supply And Internal DTCM Fault Diagnostics
- C2240-92-ETM Motor Free Running - Performance Or Incorrect Operation
- Notes
- Description And Operation - All Wheel Drive (AWD) System
- General System Architecture
- Component Functional Description-Power Transfer Unit (PTU)
- Component Functional Description-Rear Drive Module (RDM)
- Technical Data-PTU And RDM
- When Monitored
- Default Action
- Diagnostic Overview - AWD System
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Rear Drive Module (RDM) - Actuator Motor Diagnostics
- DTCM Verification Test
- C2250-78-Invalid Backlash Coupling - Alignment Or Adjustment Incorrect
- Notes
- Description And Operation - All Wheel Drive (AWD) System
- General System Architecture
- Component Functional Description-Power Transfer Unit (PTU)
- Component Functional Description-Rear Drive Module (RDM)
- Technical Data-PTU And RDM
- When Monitored
- Default Action
- Diagnostic Overview - AWD System
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Rear Drive Module (RDM) - Actuator Motor Diagnostics
- DTCM Verification Test
- C2260-63-Ecu Internal Performance - Circuit Component Protection Time-Out
- C2270-77-Power Transfer Unit PTU Electronic Disconnect Actuator EDA Sensor - Commanded Position Not Reachable
- Notes
- Description And Operation - All Wheel Drive (AWD) System
- General System Architecture
- Component Functional Description-Power Transfer Unit (PTU)
- Component Functional Description-Rear Drive Module (RDM)
- Technical Data-PTU And RDM
- When Monitored
- Default Action
- Diagnostic Overview - AWD System
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Power Transfer Unit (PTU) - Actuator Motor Diagnostics
- DTCM Verification Test
- C2280-92-EDA Current - Performance Or Incorrect Operation
- Notes
- Description And Operation - All Wheel Drive (AWD) System
- General System Architecture
- Component Functional Description-Power Transfer Unit (PTU)
- Component Functional Description-Rear Drive Module (RDM)
- Technical Data-PTU And RDM
- When Monitored
- Default Action
- Diagnostic Overview - AWD System
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Rear Drive Module (RDM) - Actuator Motor Diagnostics
- DTCM Verification Test
- C2290-92-EDA Motor Free Running - Performance Or Incorrect Operation
- Notes
- Description And Operation - All Wheel Drive (AWD) System
- General System Architecture
- Component Functional Description-Power Transfer Unit (PTU)
- Component Functional Description-Rear Drive Module (RDM)
- Technical Data-PTU And RDM
- When Monitored
- Default Action
- Diagnostic Overview - AWD System
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Power Transfer Unit (PTU) - Actuator Motor Diagnostics
- DTCM Verification Test
- C2300-00-RDM Classification Not Valid - No Subtype Information
- Notes
- Description And Operation - All Wheel Drive (AWD) System
- General System Architecture
- Component Functional Description-Power Transfer Unit (PTU)
- Component Functional Description-Rear Drive Module (RDM)
- Technical Data-PTU And RDM
- When Monitored
- Default Action
- Diagnostic Overview - AWD System
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Rear Drive Module (RDM) - Actuator Motor Diagnostics
- DTCM Verification Test
- C2400-55-PROXI Configuration - Not Configured Or Proxy Data Contains Values Invalid Or Not Correct
- Notes
- Description And Operation - All Wheel Drive (AWD) System
- General System Architecture
- Component Functional Description-Power Transfer Unit (PTU)
- Component Functional Description-Rear Drive Module (RDM)
- Technical Data-PTU And RDM
- When Monitored
- Default Action
- Diagnostic Overview - AWD System
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Drivetrain Control Module (DTCM) - Voltage Supply And Internal DTCM Fault Diagnostics
- C2501-87-Brake8 Or GE Or Lin BCM IGW1 Or Status ECM Or Mot TRANSM3 Message Missing - Missing Message
- C2502-64-Status ECM TCFAILSTS Or TRANSM2 TRANSMISSIONFAILSTS Or Brake8 DSTFAILSTS Or Brake8 ESCFAILSTS Or Status ECM EMSFAILSTS Or GE ELECTRICSTEERINGFAILSTS - Signal Plausibility Failure
- C2503-87-Instrument Panel Cluster IPC - Absent
- C2504-87-Lost Communication With Abs
- C2506-64-Shift Lever Position - Signal Plausibility Failure
- C2507-64-Brake System Module - Signal Plausibility Failure