Wireless Charging Pad Module

REMOVAL 

1. Disconnect and isolate the negative battery cable(s). Refer to BATTERY DISCONNECT AND CONNECT - STANDARD SINGLE BATTERY SYSTEM or BATTERY DISCONNECT AND CONNECT - ETORQUE SYSTEM .
2. Remove the storage bin from the front of the floor console. Refer to BIN, STORAGE, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

   1 - Fasteners

   2 - Wireless Charging Pad Module

3. Disconnect the wire harness connector from the wireless charging pad module.
4. Remove the fasteners from the wireless charging module and remove it from the storage bin.

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle.