FixVault
Home › Jeep › 2023 › Cherokee Altitude LUX › Repair and Diagnosis › Transmission › Automatic Trans › 2.4L Cooling System › Engine › Pump, Water › Installation › 2.4L

Pump, Water: Installation: 2.4L

GC0098471Courtesy of CHRYSLER GROUP, LLC
  1. Clean the gasket mating surface.
  2. Using a NEW  gasket (8), install the water pump (4) and tighten the bolts (3) to the proper torque specification. Refer to TORQUE SPECIFICATIONS - 2.4L  .
  3. Install the water pump pulley (2) and tighten the bolts (1) to the proper torque specification. Refer to TORQUE SPECIFICATIONS - 2.4L  .
  4. Install the serpentine belt. Refer to BELT, SERPENTINE, INSTALLATION .
  5. Install the belly pan. Refer to BELLY PAN, INSTALLATION .
  6. Install the right front wheel house splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, INSTALLATION .
  7. Perform the Air Evacuation and Coolant Fill Procedure. Refer to COOLING/STANDARD PROCEDURE .
About FixVault