Switch, Evaporative Emissions System Monitor: Removal
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the right rear wheelhouse splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL
.
- Disconnect the Evaporative System Integrity Monitor (ESIM) wire harness connector (2).
- Disconnect the filter hose (1) from the ESIM switch.
- Press the retaining clip (1), rotate 1/4 turn counterclockwise to unlock the ESIM from the canister.
- Remove the ESIM.