Removal And Installation: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Position the strut (2) to the vehicle.
2. Install and tighten the three NEW  strut upper mount bolts (1) to the proper torque specification. Refer to TORQUE SPECIFICATIONS .

   Courtesy of CHRYSLER GROUP, LLC

3. Install and tighten the two strut lower bolts (1) to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
4. Using (special tool #2027800020, Kit, Remover - Installer Shock / Strut), install the stabilizer bar link. Refer to LINK, STABILIZER BAR, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

5. Install the wheel speed sensor harness (2) to the strut.
6. Install the EPB harness to the strut.
7. Install the brake hose (4) to the strut and install the retainer clip (1).
8. Install the tire and wheel assembly. Refer to TIRES & WHEELS, REMOVAL AND INSTALLATION .
9. Remove the support and lower the vehicle.
10. Perform wheel alignment. Refer to WHEEL ALIGNMENT, STANDARD PROCEDURE .