1.3L - DTCS P2112 To P2308

• DTC Troubleshooting
  • P2112-Electronic Throttle Control System - Unable To Open - Bank 1
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2115-Accelerator Pedal Position Sensor 1 Minimum Stop Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2116-Accelerator Pedal Position Sensor 2 Minimum Stop Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2118-Electronic Throttle Control Motor Current Performance - Bank 1
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2122-Accelerator Pedal Position Sensor 1 Circuit Low
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2123-Accelerator Pedal Position Sensor 1 Circuit High
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2127-Accelerator Pedal Position Sensor 2 Circuit Low
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2128-Accelerator Pedal Position Sensor 2 Circuit High
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2135-Throttle Position Sensor 1 / 2 Correlation
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2138-Accelerator Pedal Position Sensor 1 / 2 Correlation
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2146-Fuel Injector Group 1 Supply Voltage Circuit/Open
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2166-Accelerator Pedal Position Sensor 1 Maximum Stop Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2167-Accelerator Pedal Position Sensor 2 Maximum Stop Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2172-High Airflow/Vacuum Leak Detected (Instantaneous Accumulation)
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2173-High Airflow/Vacuum Leak Detected (Slow Accumulation)
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2174-Low Airflow/Restriction Detected (Instantaneous Accumulation)
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2181-Cooling System Performance
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P219A-Bank 1 Air-Fuel Ratio Imbalance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2226-Barometric Pressure Sensor "A" Circuit
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2227-Barometric Pressure Circuit Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2228-Barometric Pressure Circuit Low
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2229-Barometric Pressure Circuit High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2237-O2 Sensor 1/1 Pump Cell Current Circuit/Open
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2243-O2 Sensor 1/1 Reference Voltage Circuit/Open
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2251-O2 Sensor 1/1 Negative Current Control Circuit/Open
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2271-O2 Sensor 1/2 Signal Biased Rich
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2299-Brake Pedal Position / Accelerator Pedal Position Incompatible
    • Notes
    • Theory Of Operation
    • Component Functional Description - Brake Switch
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2302-Ignition Coil 1 Secondary Circuit - Insufficient Ionization
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2305-Ignition Coil 2 Secondary Circuit - Insufficient Ionization
    • Notes
    • Theory Of Operation
    • When Monitored And Set Conditions
    • Diagnostic Test
  • P2308-Ignition Coil 3 Secondary Circuit - Insufficient Ionization
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test