2.0L - DTCS P2302 To P2461

• DTC Troubleshooting
  • P2302-Ignition Coil 1 Secondary Circuit - Insufficient Ionization
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2305-Ignition Coil 2 Secondary Circuit - Insufficient Ionization
    • Theory Of Operation
    • When Monitored And Set Conditions
    • Diagnostic Test
  • P2308-Ignition Coil 3 Secondary Circuit - Insufficient Ionization
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2311-Ignition Coil 4 Secondary Circuit - Insufficient Ionization
    • Theory Of Operation
    • When Monitored And Set Conditions
    • Diagnostic Test
  • P2453-Particulate Filter Pressure Sensor "A" Circuit Range/Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2454-Particulate Filter Pressure Sensor "A" Circuit Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2455-Particulate Filter Pressure Sensor "A" Circuit High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2457-Exhaust Gas RECIRCULATION Cooling System Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P245F-Particulate Filter Pressure Sensor "B" Circuit Range/Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2460-Particulate Filter Pressure Sensor "B" Circuit Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2461-Particulate Filter Pressure Sensor "B" Circuit High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test