FixVault
Home
›
Jeep
›
2024
›
Gladiator Nighthawk, Part Time T/Case Control, Automatic Trans
›
Repair and Diagnosis
›
Engine Performance
›
System
›
3.6L (GPEC 2A) - DTCS B1810 To B23BF
›
DTC Troubleshooting
›
B23BC-Stop/Start Disable Switch 1 Circuit Performance
›
Set Condition
Set Condition
The Powertrain Control Module (PCM) receives the Stop/Start Disable Switch voltage input over CAN Bus from the Integrated Center Stack (ICS) Switch Bank Module. The PCM detects that the Stop/Start Disable Switch 1 input is irrational.