3.6L (GPEC 5) - DTCS P1071 To P1239

• DTC Troubleshooting
  • P1071 Intake Valve Control Solenoid 2 Range/Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1072 Intake Valve Control Solenoid 3 Range/Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1073 Intake Valve Control Solenoid 4 Range/Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1115 General Temperature Rationality
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1128 Closed Loop Fueling Not Achieved - Bank 1 Upstream
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1129 Closed Loop Fueling Not Achieved - Bank 2 Upstream
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1205 Fuel Pump Control Module Internal Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1206 Fuel Pump Control Module Open Circuit To Fuel Pump
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1239 Engine Oil Temperature Too Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test