3.6L - DTCS P054C To P0602

• DTC Troubleshooting
  • P054C-Cold Start Exhaust Camshaft Position Timing Over-Advanced - Bank 2 Sensor 2
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0562-Battery/System Voltage Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0563-Battery/System Voltage High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P057B-Brake Pedal Position Sensor "A" Circuit Performance
    • Description And Operation-Braking Systems
    • Component Functional Description - 3 Wire Brake Pedal Position Sensor
    • Component Functional Description - Hydraulic Control Unit (HCU) Assembly
    • Component Functional Description-Brake Pedal Simulator Pressure Sensor
    • Component Functional Description - Wheel Speed Sensors
    • Component Functional Description - Steering Angle Sensor
    • Component Functional Description - Brake System Control Module (BSCM)
    • Technical Data-Braking System Messages
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Overview
    • Check For An Active Or Intermittent Condition
    • Diagnostic Test-EBOOSTER Brake System - Pcm
    • Diagnostic Test-Wheel Speed Sensor Faults
  • P0585-Speed Control Switch 1/2 Correlation
    • Theory Of Operation
    • Component Functional Description-Multiplex (MUX) Switch
    • Diagnostic Overview - S/C Switch
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P058A- Battery Monitor Module Performance
    • Theory Of Operation - Smart Charging Strategy
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P05AE-Active Grille Shutter 2 Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0600-Serial Communication Link
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0601-Internal Memory Checksum Invalid
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0602-Control Module Programming Error/Not Programmed
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test