Drivetrain Control Module (DTCM) - DTCS C05E5-00 To C146A-13

• DTC Troubleshooting
  • C05E5-00-4WD/AWD Clutch A Position Not Learned-
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1403-11-Transfer Case Range Position Sensor-Circuit Short To Ground
    • Theory Of Operation
    • When Monitored And Set Conditions
      • When Monitored
      • Set Condition
      • Default Action
    • Diagnostic Test
  • C1403-12-Transfer Case Range Position Sensor-Circuit Short To Battery
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Diagnostic Test
  • C1403-13-Transfer Case Range Position Sensor-Circuit Open
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Diagnostic Test
  • C1403-29-Transfer Case Range Position Sensor-Signal Invalid
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1403-62-Transfer Case Range Position Sensor-Signal Compare Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C140A-71-Transfer Case Motor Control-Actuator Stuck
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C140E-00-Transfer Case Motor Blocked-
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C140F-61-Transfer Case Range Position Sensor Erratic Performance-Signal Calculation Failure
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1438-07-Transfer Case Differential Clutch Worn-Mechanical Failures
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1455-16-AWD Clutch Power Control-Circuit Voltage Below Threshold
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • C1455-17-AWD Clutch Power Control-Circuit Voltage Above Threshold
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • C1463-92-Front Axle Disconnect Control-Performance Or Incorrect Operation
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1463-94-Front Axle Disconnect Control-Unexpected Operation
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1464-11-Front Axle Disconnect Control Circuit Low-Circuit Short To Ground
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1465-12-Front Axle Disconnect Control Circuit High-Circuit Short To Battery
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1466-13-Front Axle Disconnect Control Circuit Open-Circuit Open
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1467-11-Front Axle Disconnect Return Control Circuit-Circuit Short To Ground
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1467-22-Front Axle Disconnect Return Control Circuit-Signal Amplitude Greater Than Maximum
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C146A-13-Front Axle Disconnect Return Control Circuit Open-Circuit Open
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test