Rear Suspension

REAR CAMBER ADJUSTMENT 

Courtesy of CHRYSLER GROUP, LLC

To Adjust Camber: 

1. Loosen the spring link inner nut.
2. Rotate the spring link inner bolt until the camber reading is within specifications.
3. After the adjustment is made, hold the spring link inner bolt and tighten the spring link inner nut to the proper torque specifications. Torque the fasteners to the specifications in the torque table below.
4. Verify the proper camber setting.

REAR TOE ADJUSTMENT 

Courtesy of CHRYSLER GROUP, LLC

To Adjust Toe: 

1. Loosen the toe link inner nut.
2. Adjust the wheel toe position by rotating the toe link inner bolt as necessary.
3. Hold the toe link inner bolt and tighten the toe link inner nut to the proper torque specifications.
   NOTE:

   Verify the toe setting does not change while torquing the fastener. Torque the fastener to the specification in the torque table below.

4. Verify the proper toe setting.
5. Road test the vehicle.