AVC Programming

Active Vibration Cancellation (AVC) programming, when required, is performed using the diagnostic scan tool.

1. Using the diagnostic scan tool, navigate to the AVC module.
2. Select the "Misc. Functions"  menu.
3. Select the "AVC Transfer Function Learning"  routine.
4. Follow the on screen prompts.

As seen on the wiTECH introduction page screen, the vehicle must meet the following criteria to perform this routine:

• Ignition is in the RUN  position.
• Engine Revolution Per Minutes (RPM) are at zero.
• Vehicle speed is at 0 miles per hour (mph).
• Vehicle is currently on a non-vibrating flat surface.