Drivetrain Control Module (DTCM) - DTCS C2220-54 To C2240-92
- DTC Troubleshooting
- C2220-54 Ecu Internal Performance - Missing Calibration
- C2224-64 Engine Speed Signal Not Available
- C2225-64 Engine Status Signal Not Available
- C2226-64 Reverse Gear Status - Signal Plausibility Failure
- C2227-64 Engine Torque - Signal Plausibility Failure
- C2228-64 Implausible Data Received From Pcm
- C2229-64 Gear Not Engaged Signal - Signal Not Available
- C2230-98 Transfer Case Motor - Component Or System Over Temperature
- Description And Operation - All Wheel Drive (AWD) System
- General System Architecture
- Functional Description-Power Transfer Unit (PTU)
- Functional Description-Rear Drive Module (RDM)
- Technical Data - PTU And RDM
- Enabling/Set Conditions And Possible Causes - PTU/RDM Actuator Motor And OVERTEMP Faults
- Diagnostic Overview - AWD System
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Diagnostic Test - RDM Actuator Motor
- Diagnostic Test - DTCM Voltage Supply And Internal DTCM Faults
- C2240-92 ETM Motor Free Running - Performance Or Incorrect Operation
- Description And Operation - All Wheel Drive (AWD) System
- General System Architecture
- Functional Description-Power Transfer Unit (PTU)
- Functional Description-Rear Drive Module (RDM)
- Technical Data - PTU And RDM
- Enabling/Set Conditions And Possible Causes - PTU/RDM Actuator Motor And OVERTEMP Faults
- Diagnostic Overview - AWD System
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Diagnostic Test - RDM Actuator Motor
- DTCM Verification Test