Global Navigation Motion Module

When replacing the Global Navigation Motion Module (GNMM), perform the following steps:

1. Load the satellite Ephemeris and Almanac data.
2. Position the vehicle to an area where a full range of satellites are in view (Open Sky).
   NOTE: No obstructions >10 degrees above the GNMM antenna.

   Courtesy of CHRYSLER GROUP, LLC

3. Connect the scan tool to the vehicle.
4. Navigate to the Guided Diagnostics tab.
5. Select and perform the " PROXI Configuration Alignment  " routine.
6. Check the LAT/LONG position is correct for the vehicles current location.
7. Verify the GNMM is outputting proper global navigation data by verifying the display coordinates are correct to the vehicles location.