3.6L - DTCS P054C To P0602

• DTC Troubleshooting
  • P054C Cold Start Exhaust Camshaft Position Timing Over-Advanced - Bank 2 Sensor 2
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0562 Battery/System Voltage Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0563 Battery/System Voltage High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P057B Brake Pedal Position Sensor "A" Circuit Performance
    • Description And Operation - Braking Systems
    • Functional Description - 3 Wire Brake Pedal Position Sensor
    • Functional Description - Hydraulic Control Unit (HCU) Assembly
    • Functional Description - Brake Pedal Simulator Pressure Sensor
    • Functional Description - Wheel Speed Sensors
    • Functional Description - Steering Angle Sensor
    • Functional Description - Brake System Control Module (BSCM)
    • Technical Data - Braking System Messages
    • Enabling/Set Conditions And Possible Causes - Brake Faults In Pcm
      • When Monitored
      • Set Condition
      • Default Action
      • Possible Causes
    • Diagnostic Overview
    • Check For An Active Or Intermittent Condition
    • DIAGNOSTIC TEST - eBOOSTER BRAKE SYSTEM - PCM
    • Diagnostic Test - Wheel Speed Sensor Faults
  • P0585 Speed Control Switch 1/2 Correlation
    • Theory Of Operation
    • Component Functional Description - Multiplex (MUX) Switch
    • Diagnostic Overview - S/C Switch
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P058A Battery Monitor Module Performance
    • Theory Of Operation - Smart Charging Strategy
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P05AE Active Grille Shutter 2 Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0600 Serial Communication Link
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0601 Internal Memory Checksum Invalid
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0602 Control Module Programming Error/Not Programmed
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test