FixVault
Home › Kia › 2001 › Magentis SE, 2.4 6, Standard › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Electronic Time & Alarm Control System › ETACS (Electronic Time & Alarm Control System) › Electronic Time And Alarm Control Module › Removal And Installation

Removal And Installation

  1. Disconnect the negative (-) battery terminal.
  2. Remove the lower crash pad.
  3. Remove the bolts holding the ETACS module and disconnect the connectors.
    Fig 1: Locating ETACS Module
    G01093818
  4. Installation is the reverse of removal.
About FixVault