Removal, Installation & Overhaul

• General
  • Special Service Tools
  • Specifications
  • Diagnostic Chart
• Service & Adjustment Procedures
  • Oil Inspection
  • Oil Change
  • Oil Seal Change
• Transaxle Assembly Removal & Installation
  • Removal
  • Installation
• Disassembly, Inspection & Reassembly
  • Notes
  • Transmission Disassembly
  • Input (Primary) Shaft
    • Notes
    • PREINSPECTION
      • 3rd Gear Thrust Clearance
      • 4th Gear Side Clearance
    • Disassembly
    • Inspection
      • Synchronizer ring
      • Primary Shaft
      • Bearing
    • Assembly
    • Final Inspection
      • Notes
      • Thrust Clearance Of 3rd Gear
      • Thrust Clearance Of 4th Gear
  • Output (Secondary) Shaft
    • Notes
    • PREINSPECTION
      • 1ST Gear Thrust Clearance
      • 2ND Gear Thrust Clearance
    • Disassembly
      • Bearing And Secondary 4TH Gear
      • Secondary 3RD Gear And Secondary 2ND Gear
    • Inspection
      • Notes
      • Gears
      • Synchronizer Ring
      • Clutch Hub Assembly
      • Reverse Idle Gear And Reverse Lever
      • Bearing
      • Secondary Shaft
    • Assembly
      • Clutch Hub
      • Bearing (Differential Drive Gear End)
      • Secondary 1ST Gear, 1ST Synchronizer Ring And 1ST/2ND Clutch Hub Assembly
      • 2ND Synchronizer Ring, 2ND Gear And Secondary 3RD Gear
      • Secondary 4TH Gear And Bearing Inner Race
    • Final Inspection
  • Differential
    • Disassembly/Inspection/Assembly
    • PREINSPECTION
      • Backlash Of Side And Pinion Gear
    • Disassembly
      • Bearing (Side Opposite Ring Gear)
      • Side Bearing Inner Race
      • Bearing (Ring Gear Side)
    • Inspection
      • Notes
      • Ring Gear And Gear Case Assembly
      • Bearing
    • Assembly
      • Bearing (Ring Gear Side)
      • Bearing (Side Opposite Ring Gear)
      • Roll Pin
      • Backlash Of Side Gear And Pinion Gear
  • Clutch Housing And Transaxle Case
    • Notes
    • Disassembly
    • Assembly
    • Shim Selection
      • Notes
      • Primary Shaft Assembly
      • Secondary Shaft Assembly
      • Differential
        • Notes
        • Bearing Preload
  • Transmission Reassembly
• Shift Lever And Control Rod
  • Shift Lever Disassembly
  • Assembly
    • Extension Bar
    • Spring